Technology

SKF: Navigating the cosmos with precision

Published

on

As the next generation Very Large Array navigates towards its key science goals, SKF’s technology is playing a pivotal role in charting the stars.

GOTHENBURG, Sweden, July 3, 2024 /PRNewswire/ — SKF is providing key components for the next generation Very Large Array (ngVLA), a $2 billion telescope system that aims to peer deeper into the universe than ever before.

The U.S. National Radio Astronomy Observatory (NRAO) is planning the ngVLA to replace the highly successful Very Large Array, a group of 28 radio telescopes that have been operating in the New Mexico desert for more than 40 years. The new, more advanced and ambitious project will include 244 antennas arranged in a series of spiral arms on the current VLA site. Another 30 dishes will extend these arms more than 1,000 km across the Southwest, with additional dishes positioned across the continental United States, Hawaii and Puerto Rico to create a truly continental virtual telescope.

SKF technology will be integrated into the elevation control system of the prototype ngVLA antenna currently under construction by mtex antenna technology gmbH, a specialist in advanced radio telescope projects based in Germany.

SKF and mtex have worked together for more than two years and have defined a bearing solution that could meet the telescope’s requirements for high load capacity, low friction and extreme precision. In use, the system must be able to point the antenna with an accuracy of less than one thousandth of a degree, while continuously adjusting its position to compensate for the effects of wind and the Earth’s rotation.

The prototype elevation control system includes two 720 mm SKF spherical roller bearings manufactured to unusually high accuracy to minimize thickness variations that could cause the antenna to wobble during motion. The bearings are mounted on tapered sleeves that allow the final clearance to be precisely adjusted during assembly to further reduce radial runout during operation. Finally, an SKF automatic lubrication system will minimize stick-slip and reduce friction and wear during telescope operation.

The prototype antenna will be installed at a test site in New Mexico later this year, before undergoing extensive testing over the next 18 months. If all goes according to plan, the NRAO will begin large-scale production of antennas for the ngVLA project in 2027, supporting a construction process that is expected to take a decade.

Aktiebolaget SKF
      (publ)

CONTACT:
Carl Bjernstam,
Head of Media Relations
+46 31 337 25 17
carl.bjernstam@skf.com 

This information was brought to you by Cision http://news.cision.com

https://news.cision.com/skf/r/navigating-the-cosmos-with-precision,c4010455

The following files are available for download:

https://mb.cision.com/Main/637/4010455/2898542.pdf

20240703 Navigating the cosmos with precision

https://news.cision.com/skf/i/1021006-vis-21-21000-open-day-3-kamera-default-camera-w-credit,c3317016

1021006-VIS-21-21000 Open-Day 3 Kamera Default Camera w credit

https://news.cision.com/skf/i/ngvla-poster-antennabkg-w-credit-larger-1920×1080-2-main,c3317017

ngVLA Poster antennabkg w credit larger 1920×1080 2 main

https://news.cision.com/skf/i/1021006-vis-21-21000-open-day-2-kamera-kamera-2-w-credit,c3317018

1021006-VIS-21-21000 Open-Day 2 Kamera Kamera 2 w credit

 

View original content:https://www.prnewswire.com/news-releases/skf-navigating-the-cosmos-with-precision-302188730.html

SOURCE SKF

Leave a Reply

Your email address will not be published. Required fields are marked *

Trending

Exit mobile version