Connect with us

Technology

CathSOLVER™ simplifies MicroCatheter Design Development

Published

on

Roth Technologies, LLC announces the release of the CathSOLVER™ function add-in for the CathCAD® Standard software with a general availability date of March 1, 2024 for all licensed Users. Since its inception in 2013, the CathCAD® Software has executed over 260,000+ catheter modeling runs executed by licensed Users and includes all Tier 1 medical companies as licensed users.

SAN ANTONIO, Feb. 29, 2024 /PRNewswire-PRWeb/ — Roth Technologies, LLC announces the immediate release of the CathSOLVER™ function add-in for the CathCAD® Standard software for all licensed Users.

CathCAD® modernized the microcatheter design process in 2012 by solving the forward problem catheter design problem numerically, that is, given the geometry and the physical characteristics of the design, the Software computed the functional characteristics of the design including longitudinal rigidity, flexural rigidity, torsional rigidity, kink radius, and the applicable failure modes.CathSOLVER™ solves the inverse catheter design problem, that is, given a set of desired characteristics (ID, OD, number of layers, and desired physical attributes), the Software will compute and provide the “best” design that meets the catheter design requirements. This software update provides near Artificial Intelligence (AI) capability into the CathCAD® software.

When the applicable design parameters are fully developed by the User, the CathSOLVER™ algorithm executes hundred of designs iterations resulting in the Software determining the best design given the User’s defined constraints.

Highlights of the CathSOLVER™ Software update include the following:

The ability to enter the desired numical values of longitudinal ridigity (EA), flexural rigidity (EI), and torsional rigidity (GJ), ANDThe ability to enter weighting factors for the desired values of EA, EI, and GH, allowing the User to guide the Software on the important characteristics of the design, ANDThe ability to enter constraint factors including maximum outside diameter and maximum kink radius, ANDThe ability to select from a list of standard materials that the User wishes to apply to the optimization problem, ANDThe ability to select from a list of braid wires that the User wishes to apply to the optimizaton problem, ANDThe ability to enter design limiting factors that include but not limited to min/max layer thicknesses and min/max pick counts.

When the applicable design parameters are fully developed by the User, the CathSOLVER™ algorithm executes hundred of designs iterations resulting in the Software determining the best design given the User’s defined constraints. This additional functionality allows for the novice designer to become more effective in creating designs that satisfy the required design characteristics. The CathSOLVER™ function is also expected to greatly assist expert catheter designers evaluate their designs as it nearly fully automates the design process which to date was done by a manual, iterative process.

The CathCAD® software allows the User to model multi-layered composite tubing. The Software computes flexural (EI), longitudinal (EA), and torsional (GJ) rigidities and also includes the following additional capabilities:

Catheter failure mode analysis including tensile strength, torque, kink radius, tube ovalization, and external pressure rating, andA “fuse down/lamination” model that may be used to size the correct outer material dimensional requirements, andAn ovalization model that is used to compute the ovalized (elliptical) shape of a multi-layered composite tube when bent around a series of radiuses, andA displacement model that predicts the deflection and angular twist when a multisegment design is subjected to an external load or moment, and

The CathSOLVER™ feature will be made available at no additional charge to existing CathCAD® licensed users and is offered to new customers under the Roth Technologies, LLC standard software licensing terms and conditions.

Since its inception in 2013, the CathCAD® Software has executed over 260,000+ catheter modeling runs executed by licensed Users and includes all Tier 1 medical companies as licensed users. The CathCAD® software has a global client list including customers in the USA, Canada, Ireland, Germany, England, Japan, China, India, and Australia.

Media Contact

R Roth, Roth Technologies, LLC, 1 2103809890, sales@cathcad.com, www.cathcad.com

View original content to download multimedia:https://www.prweb.com/releases/cathsolver-simplifies-microcatheter-design-development-302076834.html

SOURCE Roth Technologies, LLC

Continue Reading
Click to comment

Leave a Reply

Your email address will not be published. Required fields are marked *

Technology

Dana-Farber Cancer Institute Partners with Clinical.ly to Enhance Regulatory Operations with eReg Solutions

Published

on

By

NEW YORK, Sept. 19, 2024 /PRNewswire/ — The Dana-Farber Cancer Institute, a world leader in cancer treatment and research, chose Clinical.ly’s (www.clinical.ly) Research Suite™ to streamline regulatory operations, marking a significant step toward more efficient and compliant clinical trial management. Dana-Farber joins a growing number of research organizations that leverage Clinical.ly’s innovative solutions to streamline clinical trial processes. Clinical.ly’s eReg platform offers a comprehensive, paperless solution that centralizes regulatory workflows, ensuring compliance and transparency across clinical trials.

“We are thrilled to support Dana-Farber’s clinical research operations,” said Henry Kravchenko, Clinical.ly’s CEO.

This partnership continues Clinical.ly’s success in providing best-in-class enterprise tools for conducting clinical research. “We are thrilled to support Dana-Farber’s clinical research operations,” said Henry Kravchenko, Clinical.ly’s CEO. “Our eReg platform and wider set of features in Clinical.ly Research Suite™ will empower that renowned organization, and we all look forward to supporting their teams.”

About Clinical.ly Research Suite™ 

Clinical.ly Research Suite™ is a comprehensive solution that eliminates traditional, paper-based processes. By automating and centralizing essential workflows in the Clinical.ly Research Suite™, organizations achieve huge efficiency improvements, greater trial oversight, document management, and regulatory compliance. The Clinical.ly Research Suite™ includes:

eReg: A best-in-class electronic regulatory bindereSource: An intuitive & feature-rich, paperless data capture solution that streamlines data collection from trial participantseConsent: A fully digital solution for capturing informed consent, improving participant engagement and site complianceClinicallySign: 21 CFR Part 11 compliant eSignature functionalityClinicallyPay: A secure and instantaneous participant stipend payment and reimbursement solution

About Dana-Farber Cancer Institute

Founded in 1947, Dana-Farber Cancer Institute is committed to providing adults and children with the best treatment available today while developing tomorrow’s cures through cutting-edge research. Based in Boston, Dana-Farber is a teaching affiliate of Harvard Medical School and ranks consistently as one of the top cancer hospitals in the world.

About Clinical.ly

Clinical.ly provides differentiated, cloud-native technology solutions to the clinical research industry, enabling research organizations to conduct studies with greater efficiency and ease. Clinical.ly is dedicated to developing technology that eliminates tedious manual labor, allowing clinical research professionals to focus on patient care.

View original content to download multimedia:https://www.prnewswire.com/news-releases/dana-farber-cancer-institute-partners-with-clinically-to-enhance-regulatory-operations-with-ereg-solutions-302253690.html

SOURCE Clinical.ly

Continue Reading

Technology

Fall Into Creativity with the Monport Laser Fall Sale

Published

on

By

NEW YORK, Sept. 19, 2024 /PRNewswire/ — Experience laser innovation this Fall with Monport Laser, an industry frontrunner in laser engraving and cutting technology, with an exclusive Fall Sale offering incredible discounts and free accessories on a wide range of high-performance laser engraving machines. From September 19th to September 30th, customers can take advantage of this limited-time opportunity to elevate their laser engraving businesses with cutting-edge laser innovation at unbeatable prices.

Monport Laser has been dedicated to providing innovative and reliable laser machines that empower businesses and individuals to achieve their goals. With a focus on quality, precision, and customer satisfaction, Monport Laser has established itself as a trusted leader in the industry. Their commitment to excellence is evident in every laser they produce, ensuring exceptional performance, reliability, and value.

Embrace the Power of CO2 Laser Technology with Exclusive Offers

Monport Laser will offer two free accessories with selected CO2 laser machines during the Monport Fall sale. These versatile lasers are ideal for various applications, including engraving, cutting, and marking wood, acrylic, leather, and more. By taking advantage of this Fall sale, laser engraving businesses can enhance their productivity and expand their creative possibilities.

Experience Unmatched Value with Fiber Laser Discounts

Monport Laser offers substantial discounts of up to $4200 and 3 free accessories on selected models for those seeking the precision and speed of fiber laser technology. Fiber lasers are renowned for their ability to process metals with exceptional efficiency and accuracy, making them indispensable for metal fabrication, manufacturing, and jewelry production. Additionally, customers purchasing fiber lasers during the Fall sale will receive three free accessories, further sweetening the deal.

Elevate Your Desktop Laser Experience with a Free Water Chiller

Monport Laser is committed to providing comprehensive solutions for businesses of all sizes. As part of the Fall sale, customers who purchase the 40W Desktop laser will receive a Free Water Chiller Cw3000. This essential accessory ensures optimal cooling and performance, prolonging the lifespan of the laser and guaranteeing consistent results.

Discover Additional Savings on a Wide Range of Accessories

Monport Laser offers an additional 20% discount on selected accessories to complete your laser setup. From lenses and nozzles to rotary tables and smoke extraction systems, customers can find everything they need to maximize the potential of their laser machines.

Unleash Your Creativity and Productivity

Monport Laser’s Fall sale is the perfect opportunity to invest in laser technology that empowers your business or fuels your creative passions. With exceptional discounts and free accessories, you can acquire the ideal laser solution to meet your needs and budget.

Whether you’re an entrepreneur, artist, or manufacturer, Monport Laser’s advanced laser machines offer unparalleled precision, versatility, and reliability. Take advantage of this limited-time Fall sale and unlock your projects’ full potential for laser innovation.

About Monport Laser

Monport Laser is a global leader in designing, manufacturing, and distributing high-quality laser machines and accessories. With a commitment to innovation and customer satisfaction, Monport Laser provides cutting-edge solutions for various industries, including manufacturing, engraving, marking, and more.

For more information, visit monportlaser.com and follow them on social media for the latest updates.

Website: https://www.monportlaser.com/

 

 

 

View original content:https://www.prnewswire.com/news-releases/fall-into-creativity-with-the-monport-laser-fall-sale-302253699.html

SOURCE Monport Laser

Continue Reading

Technology

MEDIA ADVISORY – Minister Wilkinson to Make a Critical Minerals Infrastructure Announcement

Published

on

By

VANCOUVER, BC, Sept. 19, 2024 /CNW/ – The Honourable Jonathan Wilkinson, Minister of Energy and Natural Resources, and Ranj Pillai, the Premier of Yukon, will make a funding announcement in support of critical minerals infrastructure projects. A media availability will follow.

Date: September 20, 2024

Time: 10:30 a.m. PT

All accredited media are asked to pre-register by emailing media@nrcan-rncan.gc.ca. A dial-in line is available for media and will be provided upon registration.

Follow us on LinkedIn

SOURCE Natural Resources Canada

Continue Reading

Trending