Connect with us

Technology

DIGITIMES Asia: Why TSMC may have different strategies in Japan and Arizona? Q&A with former TSMC General Counsel Richard Thurston

Published

on

TAIPEI, Feb. 27, 2024 /PRNewswire/ — Asia Pacific (Japan, Korea, Taiwan, Mainland China, and Singapore) accounts for 84% of global chip exports and is home to 10 of the 16 semiconductor exporters and the top six suppliers, which includes Taiwan Semiconductor Manufacturing Company (TSMC). The leading pure-play foundry celebrated the inauguration of its first fab in Kumamoto, Japan, on February 24, 2024.

Why is semiconductor production so concentrated in the countries in East Asia? Why was TSMC willing to form its Japanese joint venture but decided to have a stand-alone greenfield investment in Arizona to build advanced chips? Can TSMC successfully replicate its pure-play foundry business model in its second fab in Japan?

DIGITIMES Asia held an exclusive interview with Dr. Richard L. Thurston, the Founder and Principal Member of RLT Global Consulting and CEO of Hudson Valley Fast Fab (“HVFF”). Thurston retired from TSMC as Senior Vice President and General Counsel in 2014, served as a consultant for TSMC, and worked for Texas Instruments (TI) to negotiate joint venture and trade agreements with Japan in the 1980s and 1990s.

Along with DIGITIMES advisor Dr. Albert Lin, Dr. Thurston will also share his insights on Japan and whether it still has what it takes to succeed in the Angstrom era on the first DIGITIMES Asia GeoWatch forum, scheduled on March 27 Taipei time.

Q: TSMC inaugurated its first fab in Kumamoto and has disclosed investment plans for a second fab there. Singapore is said to have re-pitched with even better incentives to attract investments from TSMC. Based on your experience in Japan and your work at TSMC, why is semiconductor manufacturing so successful in this part of Asia? Will TSMC be successful in replicating its pure foundry model in Japan?

In Japan, pure-play foundries have not yet been successful, and making this business model work in Japan will be challenging. In South Korea, Samsung has been able to do some foundry work with its excess capacity, but not as a pure-play foundry: it is still, principally, an IDM. Singapore has foundries because of the legacy of Chartered Semiconductor (acquired by Globalfoundries), UMC, and SSMC, a 1998 TSMC joint venture with Philips/NXP (I was on the SSMC Board of Directors from 2002-2013). But, of course, no one has been as successful as TSMC with the pure-play foundry model. There is a distinction between pure play and others that do some foundry work.

I joined Texas Instruments in 1984 as Asia-Pacific Legal Counsel. We operated several manufacturing plants in Japan, Taiwan, Singapore, and Malaysia. Therefore, I’ve been in a unique position to observe the successful development of the semiconductor industry in these Asian countries. A lot of it comes down to culture. It comes down to the focus and discipline that the corporation creates. It’s the workforce, and it’s also the customer base.

Quite honestly, I think that creating a pure-play foundry in Japan is going to be very difficult. Based on what I have read, TSMC is not creating a pure-play foundry but a customer-driven/dedicated facility. It is a well-thought-out hybrid joint venture. Sony requires more advanced, high-performance CMOS image sensors to drive its growing markets. This need should drive TSMC’s Kumamoto facility.

There are many, and perhaps 10-20 factors attributable to TSMC’s success, including technological breakthroughs, skills at transferring R&D from lab to mother fab, better yields, and focused customer engagement, to name a few. Examples of leading-edge customer engagement include Apple, Nvidia, Qualcomm, AMD, TI, Sony, Fujitsu, etc.

I lived on the ground in Tokyo, Japan, for Texas Instruments for 3.5 years, fought the trade war battles, and negotiated with the Japanese government and businesses – it was and remains a much different world within which to manufacture and sell semiconductor devices. When Rick Tsai was TSMC’s CEO, we explored different manufacturing opportunities in Japan during 2005-2009. Fujitsu was probably the most promising because of its focus on advanced technology, and we explored a Joint Venture approach with them. We also explored the pure-play foundry model, but the Japanese government blocked that. They did not want TSMC to run a foundry in Japan. Why? Partly because of the culture, their mindset, the baggage of their manufacturing legacy, and the Japanese Government’s heavily nationalistic industrial policy.

TSMC’s approach with Sony is the right one to take: to focus on one or more joint ventures with local customer engagement.

Q: Perhaps the Japanese government’s thoughts have changed after the pandemic. And right now, they are very eager to have their semiconductor industry revive again. Huge investments followed TSMC’s announcement to build the first fab in Kumamoto in 2021, and many fabs in Japan are commencing mass production this year. Why did TSMC form a joint venture in the Kumamoto fab starting as a minority shareholder instead of a wholly owned subsidiary?

TSMC is very smart to continue doing joint ventures. Chairman Liu and CEO Wei understand that they don’t have to put 100% of the equity capital into an investment. They can maintain control through technology, intellectual property licenses, other contracts, veto rights, etc. They can expand capacity smartly, reducing the risks of not bleeding themselves dry financially. They do not have to do all the heavy lifting in a foreign country with which they’re not as familiar as in their home country. We had discussed this model often in the past. Although TSMC Japan has many good people who know Japanese culture very well, it is difficult for any foreign company, let alone a Chinese-ethnic-based firm, to be successful in Japan as a standalone. It doesn’t work from a cultural standpoint, and we were well aware of that at TI.

Q: Yes. Well, then, why did TSMC choose to do it alone in Arizona? Should they have chosen to do a Joint Venture instead? Would that have been more conducive to progressing the fab?

Allow me to say that I don’t know the specific nature of any of the discussions TSMC had with Federal and State governments or with any of their customers. But while I was there, in light of the Founder’s concerns over the history of WaferTech, we always had talked about doing a standalone foundry in the United States. Part of this discussion was because of the bitter taste left in some people’s mouths, especially that of the Founder. You will recall that TSMC formed a joint venture in Washington State with three partners in 1996, but that did not work for many reasons. Therefore, TSMC quickly exited that joint venture relationship to create the stand-alone foundry in the WaferTech operation. The Arizona initiative originated because most of the TSMC management team had thought a lot during 2005-2010 about where and when to expand production in the US. That is why we pursued multiple talks with IBM to acquire its Microelectronics Division, and the last and most serious talks occurred during 2012-13. It was all about setting up an advanced lab that we could control and manage much more successfully than a joint venture. While I was involved, Arizona became a location initially out of “suggestion” with the lure of significant subsidization.

Q: You said the Japanese government was difficult. However, the semiconductor companies here in Taiwan were perplexed by the attitude of the American government because they said so much about the importance of chip resilience but did not help to accelerate the building of the fabs and allocating funds early. That’s why I think a lot of companies, including TSMC, felt that they probably have misinterpreted the overall situation.

The dynamics in Washington, DC, sometimes are fast to change, but most often extremely slow in the follow-up. Meanwhile, American paranoia has caused an unusual focus on the most advanced process technologies rather than equally important legacy (something less than most advanced) technologies. Washington, DC, became overly focused on pushing TSMC to build its most advanced processes and linked large subsidies to that process node. And, unfortunately, with all the different agencies competing out there for limited funding and with 2024 election politics that have been ongoing for a while, monies have been diluted significantly – up to now (perhaps it might change). I think that altogether 39 states have gotten some CHIPS money through different tech hubs that may have diluted the pool too much. How many of those are going to be successful? I would like to say all of them, but I don’t believe that.

Also, there has been some misreading of the tea leaves. It is hard to say who has been at fault. I believe TSMC has a strong and capable American Government Relations manager. MediaTek has a good person, too. It’s somewhat confusing because they get different stories based on who they talk with on the “Hill.” Keep in mind that the CHIPS office is like a startup. The CHIPS office doesn’t have a year under its belt despite all of the bureaucracy going into it. They just started to compete with METI in Japan, Korea’s MOTIE, the Singapore EDB, etc. There’s always bound to be some miscommunication. And when too many politicians and lobbyists get their hands on these important funds, it becomes confusing. There has to be constant recalibration. You’re correct, the important and larger companies that are part of the US supply chain need to be treated better than they have, at least publicly. Hopefully, a recalibration will occur, and we will receive a more positive outlook sometime in March 2024.

Q: You are one of the very few non-tech experts in the semiconductor industry, and you have accumulated experience helping countries and companies build up research and development hubs. What would you advise the Taiwanese companies to do to navigate the uncertainties in the future?

Thank you for your compliment. Unfortunately, one must have several crystal balls. Japan is perhaps one of the more difficult countries to deal with consistently and successfully. Singapore is somewhat less complicated, although very bureaucratic in its way. The local team, whether in Japan, Singapore, or South Korea, must have a good balance between local and ‘foreign” management. In Japan, a foreign company with only Japanese management cannot get its foot in the door of Japanese government organizations. Sometimes, a more assertive American or European management presence is needed.

For example, when I worked for TI, Jerry Jenkins (then Chairman, President, and CEO) took my advice and sent me and two other American managers to live in Japan and to assist with trade and commercial negotiations. We were ultimately successful in opening the market, negotiating trade agreements and joint ventures, and increasing TI sales in Japan from around US$200 million to US$1.6 billion by the time I left TI.

I spent a lot of time handling Japanese government relations successfully, and one of my best friends went on to become the vice minister of the National Police Agency and worked with me over the years. Norm Neureiter, who followed me, was also very successful. No one will ever get into the inner sanctum of the government. However, effective communication is essential, and it is crucial to have a strong government relations team that is on the job 24/7.

With Sony as a core partner, TSMC is doing it right. It’s a good selection. Fujitsu and Renesas are also good potential partners. Companies must have full-time government relations and staff that manage it, understand it, and support the country manager and fab manager. A multicultural presence is a must-have to succeed in Japan and Arizona as well.

For TSMC, I had recommended to Chairman Chang and other senior TSMC management that we should send Rick Cassidy from the United States to Japan – when we first considered manufacturing in Japan. A strong Taiwan-based manager was sent instead, and he had some success. We should not deny that a cultural competition/divide requires more experienced foreign advisers to the local team. Regardless, an important element behind success is constant communication with government agencies – make them feel that they are part of the venture to understand your goals and objectives and never embarrass them.

Online Forum – TSMC Sparks Semiconductor Renaissance in Japan:

Delve into “TSMC Sparks Semiconductor Renaissance in Japan” at our GeoWatch Webinar. We’ll examine TSMC’s strategic success with its new Kumamoto plant and its implications for global semiconductor leadership amidst the intense chip rivalry. Discover how Japan’s unique advantages are aligning with TSMC’s expansion strategies.

If you wish to join this online forum, register at: https://www.digitimes.com.tw/seminar/DIGITIMESAsia_20240327/

 

View original content to download multimedia:https://www.prnewswire.com/news-releases/digitimes-asia-why-tsmc-may-have-different-strategies-in-japan-and-arizona-qa-with-former-tsmc-general-counsel-richard-thurston-302072081.html

SOURCE DIGITIMES ASIA

Continue Reading
Click to comment

Leave a Reply

Your email address will not be published. Required fields are marked *

Technology

Molex Unveils Versatile VaporConnect Optical Feedthrough Modules Enabling Thermal Management Innovations to Address AI-Driven Data Center Growth

Published

on

By

First-to-market, cassette-based solution for two-phase immersion cooling slashes time and cost associated with installing and upgrading hyperscale data centersPlug-and-play deployment easily connects immersion-tank optical transceivers to cabling infrastructure via fully upgradeable sealed modulesFuture-proof capabilities include flexibility to change connector types and shuffle circuit configurations without impacting mechanical interfaces or tank design

LISLE, Ill., Sept. 23, 2024 /PRNewswire/ — Molex, a global electronics leader and connectivity innovator, today introduced a thermal management solution that reduces the time and cost of deploying and upgrading high-performance data centers to meet unrelenting demand for generative AI and machine learning workflows. Molex VaporConnect™ Optical Feedthrough Modules for two-phase immersion cooling address constant increases in data center speed and capacity by leveraging a unique, cassette-based design that bolts directly onto immersion tanks and enables optical transceivers and network cabling infrastructure to be swapped out without changing mechanical interfaces or impacting immersion tank architecture. Reference designs for the new modules will be available commercially in Q1 of 2025.

“Molex continually embraces innovative optical solutions to ease data center deployments and upgrades while alleviating critical thermal management challenges,” said Trevor Smith, general manager, Optical Connectivity, Molex. “VaporConnect gives customers the flexibility to upgrade connectivity and scale cooling system designs to keep pace with data center growth by simply deploying a different module, which will accelerate upgrades while reducing overall energy, cooling and technology costs.”

Streamlining Two-Phase Immersion Cooling
Molex VaporConnect Optical Feedthrough Modules simplify the connections between optical transceivers contained within immersion tanks and cabling infrastructure that exists outside the tank using fully upgradeable sealed modules. With VaporConnect, sealing and cabling is accomplished inside the module, giving customers the opportunity to upgrade connectors without impacting immersion tank design or architecture. Additionally, customers have the flexibility to re-use standard cabling infrastructure for multiple product generations, which further reduces deployment time, cost and complexity.

A full range of industry-standard and Molex optical connector form factors are available for single- and multi-mode fiber solutions. They also feature mix-and-match functionality to facilitate system upgrades to newer or denser connectors. Customizable module footprints are available to fit specific space and application requirements. Also, Molex VaporConnect Optical Feedthrough Modules are designed to minimize external patching and shuffle requirements by leveraging Molex FlexPlane™ optical circuitry technology. As a result, complex optical shuffles and high-density fiber routing are integrated seamlessly within the module for simpler installation and plug-and-play operation.

Reliable, Versatile, Upgradeable Optical Interconnects
A sealing gasket comes with every VaporConnect module, which is thoroughly tested using industry-standard, helium-leak testing to ensure a reliable seal with the tank wall. This also assures a seamless transition from the server line cards inside the tank to outside cabling infrastructure. Testing is underway for compliance with industry-standard GR-1435-CORE.

VaporConnect modules are designed to accommodate customer specifications, with the number of fiber channels dependent on the number and type of connectors used. As many as 576 fibers can be integrated into a single module. A range of form factor options are available, including MPO, LC and very small form factor (VSFF) options, such as MMC, MDC, SN and SN-MT. This ensures conformance to existing infrastructure and streamlines system upgrades. As part of Molex’s continued investment in this area, an EBO connector option is currently in development, with availability slated for the first half of 2025.

Molex’s Commitment to Optical Network Innovations on Display at ECOC 2024
As the largest manufacturer of Optical Feedthrough Modules for two-phase immersion cooling, Molex has shipped more than 350,000 optical channels to date. At this year’s ECOC’24, Molex will reinforce its commitment to optical network infrastructure innovations with on-site product displays, including the new VaporConnect Optical Feedthrough Modules. The company’s extensive line of optical connectivity products, optoelectronics solutions and wavelength management systems also are being featured at Stand C75. As a participating member in OIF, Molex is part of an interoperability demonstration, which takes place at Booth B83, to spotlight optical networking innovations and solutions for data centers, AI/ML technologies and disaggregated systems.

About Molex
Molex is a global electronics leader committed to making the world a better, more-connected place. With a presence in more than 40 countries, Molex enables transformative technology innovation in the automotive, data center, industrial automation, healthcare, 5G, cloud and consumer device industries. Through trusted customer and industry relationships, unrivaled engineering expertise, and product quality and reliability, Molex realizes the infinite potential of Creating Connections for Life. For more information, visit www.molex.com.

View original content to download multimedia:https://www.prnewswire.com/news-releases/molex-unveils-versatile-vaporconnect-optical-feedthrough-modules-enabling-thermal-management-innovations-to-address-ai-driven-data-center-growth-302254979.html

SOURCE Molex Incorporated

Continue Reading

Technology

CASIO Aims to Capture the Capital’s Fashion-Centric Urban Youth with its New Exclusive Store at Kamla Nagar

Published

on

By

NEW DELHI, Sept. 23, 2024 /PRNewswire/ — Casio Computer Co. Ltd, headquartered in Japan and the parent company of Casio India, launches its exclusive store in Kamla Nagar. With this endeavour, the brand has strengthened its retail footprint to 64 stores across India with the fifth exclusive Casio store in New Delhi.

Located in the heart of Kamla Nagar market, a vibrant hub for Delhi University students, the new Casio Exclusive store is poised to become an emblem of trendsetting timepieces, blending Japanese quality and craftsmanship with sophisticated style. The store features G-SHOCK’s Limited-Edition drops, all iconic styles of 5000, 5600, 6900, 110 & 2100 Series and the latest launches from the G-STEEL range. Customers will find timepieces that showcase precision and design—from the rugged durability of G-SHOCK to the timeless elegance of Casio watches to the sophisticated chronographs of Edifice, and the nostalgic appeal of Vintage—catering to a wide array of tastes and preferences.

Speaking about the launch, Mr. Hideki Imai, Managing Director of Casio India, said, “We are thrilled to announce the opening of our newest CASIO store in Kamla Nagar, marking our fifth milestone in Delhi and our 64th across India. This launch represents a significant step in our nationwide expansion and our commitment to engaging with the students and watch enthusiasts who frequently visit and reside in the North campus of Delhi University.

“Kamla Nagar, with its vibrant community of young, creative minds, is the ideal location for our newest store. This launch reinforces our dedication to delivering unique and immersive experiences to our consumers in Delhi NCR, aligning with their evolving lifestyles and preferences. We look forward to welcoming our customers to the new store, where they can experience a fine blend of Japanese craftsmanship, unmatched durability and trendsetting style.”

Set to open its doors to Delhi University’s fashion and watch enthusiasts who value individuality and a unique sense of style, this store promises an enthralling experience unlike any other. Located at Shop No. 33/34, Kamla Nehru Marg, Bungalow Road, the brand invites visitors to explore its newly curated space, where every corner embodies the spirit of innovation and creativity. The store is operational from 10:30 AM to 09:30 PM on all days of the week.

About Casio India Co. Pvt. Ltd.:

Casio India Co. Pvt. Ltd.(CIC) is the Indian subsidiary of Casio Computer Co., Ltd., Tokyo, Japan, one of the world’s leading manufacturers of consumer electronics and business equipment solutions. Casio India has established a dynamic presence in the Indian market since 1996, emerging as a leading and cherished consumer goods manufacturer. Casio India’s range of products includes the sales and marketing of Timepieces, Electronic Musical Instruments, Desktop Calculators, Scientific Calculators, Label Printers, and Clocks.

 Setting the benchmark for excellence, Casio India is dedicated to embodying the spirit of innovation and quality that defines the Casio legacy. With a strong commitment to its corporate creed of ‘creativity and contribution,’ Casio has consistently translated this ethos into the creation of innovative products making a positive impact on society.

For more information, visit https://www.casio.com/in/

Photo: https://mma.prnewswire.com/media/2512416/Kamla_Nagar_store.jpg

 

View original content to download multimedia:https://www.prnewswire.com/in/news-releases/casio-aims-to-capture-the-capitals-fashion-centric-urban-youth-with-its-new-exclusive-store-at-kamla-nagar-302255299.html

Continue Reading

Technology

Hospital in Greenland chooses Sectra’s radiology solution–enhanced cross-country collaboration for improved patient care

Published

on

By

LINKÖPING, Sweden, Sept. 23, 2024 /PRNewswire/ — International medical imaging IT and cybersecurity company Sectra (STO: SECT B) will provide its enterprise imaging solution to Dronning Ingrids hospital (DIH) in Greenland. The solution will enhance DIH’s ongoing collaboration with hospitals in Denmark, addressing resource and subspecialty challenges, and ultimately improving patient care in the region. 

“The partnerships we have with hospitals in Denmark are highly important to us as we, being sparsely populated, struggle to recruit staff and cover medical specialties locally. To deliver care at the speed and quality we want, we need to both increase the efficiency of our internal radiology workflows and facilitate the cooperation with healthcare providers in Denmark. Sectra’s unified platform enables this by providing easy access to images, data, patient portfolio and necessary tools, along with the ability to efficiently share information,” says Cosmus Pyndt, Manager of the diagnostic and therapeutic department in the region.

DIH is Greenland’s central hospital. It is located in the city of Nuuk, also supporting 15 clinics spread around the country. The contract for Sectra’s enterprise imaging solution was signed in the second quarter of Sectra’s 2024/2025 fiscal year following a donation to the hospital from Kirsten og Freddy Johansens Fond. DIH will initially utilize the solution’s module for radiology.

“Sharing resources, expertise and workload between hospitals within a region or, as in this case, even across borders, is crucial in handling the increasing workloads in healthcare and resource shortages. Therefore, the sharing of information and images between hospitals should be efficient and easy. It is encouraging to witness the collaboration between DIH and hospitals in Denmark. The involvement of Rigshospitalet in Denmark, which went live with Sectra this summer, and particularly the expertise of Chief Radiologist Martin Lundsgaard Hansen, has been helpful in shaping this project,” says Sune Henriksen, Managing Director, Sectra Denmark.

He continues: “I am honored to support Dronning Ingrids hospital in delivering high-quality patient care, and we are excited about this new chapter for Sectra as we extend to support healthcare in Greenland.”

Sectra’s enterprise imaging solution provides a unified strategy for all imaging needs while lowering operational costs. The scalable and modular solution, with a VNA at its core, allows healthcare providers to grow from ology to ology and from enterprise to enterprise. Visit Sectra’s website to read more about Sectra and why it’s top-ranked in ‘Best in KLAS‘.

About Sectra
Sectra contributes to a healthier and safer society by assisting health systems throughout the world to enhance the efficiency of care, and authorities and defense forces in Europe to protect society’s most sensitive information. The company, founded in 1978, is headquartered in Linköping, Sweden, with direct sales in 19 countries, and distribution partners worldwide. Sales in the 2023/2024 fiscal year totaled SEK 2,964 million. The Sectra share is quoted on the Nasdaq Stockholm exchange. For more information, visit Sectra’s website.

For further information, please contact:
Dr. Torbjörn Kronander, CEO and President Sectra AB, +46 (0)705 23 52 27
Marie Ekström Trägårdh, Executive Vice President Sectra AB and President Sectra Imaging IT Solutions, +46 (0)708 23 56 10

This information was brought to you by Cision http://news.cision.com

https://news.cision.com/sectra/r/hospital-in-greenland-chooses-sectra-s-radiology-solution-enhanced-cross-country-collaboration-for-i,c4040465

The following files are available for download:

View original content:https://www.prnewswire.co.uk/news-releases/hospital-in-greenland-chooses-sectras-radiology-solutionenhanced-cross-country-collaboration-for-improved-patient-care-302255306.html

Continue Reading

Trending